UST Programs - LG 113

Issue Date: November 22, 1995
Revision Date: March 11, 2004

Vaporless Manufacturing

Vaporless LD-3000, LD-3000S

AUTOMATIC MECHANICAL LINE LEAK DETECTOR

Certification	Leak rate of 3.0 gph with PD = 100% and PFA = 0%.
Leak Threshold	2.0 gph. A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold.
Applicability	Gasoline, diesel, aviation fuel. Other liquids may be tested after consultation with the manufacturer.
Specification	System tests pressurized steel and fiberglass pipelines. Tests are conducted at operating pressure.
Pipeline Capacity	Maximum of 320 gallons.
Waiting Time	None between dispensing and testing.
Test Period	Response time is 9 seconds.
System Features	Permanent installation on pipeline. Automatic testing of pipeline. LD3000 - restricted flow to dispenser if leak is declared. LD3000S - pump shutoff if leak is declared.
Calibration	Equipment must be checked annually for capability of detecting a line leak of 3.0 gph and, if necessary, calibrated in accordance with manufacturer's instructions.
Comments	Functionality and operability of the 99 LD-3000 are unchanged by installation of the Leak Detection Sensor (piston switch) that supports the VMI ISM-4080 and ISM-4081 Integrated Shutdown Module.

Vaporless Manufacturing	Evaluator: Ken Wilcox Associates
8700 East Long Mesa Drive	Tel: (816) 443-2494
Prescott Valley, AZ 86314	Dates of Evaluation: 08/20/93
Tel: (928) 775-5191

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.
For full details, please refer to our expanded "DISCLAIMER" page.

	Internet Explorer 7.0:	http://www.microsoft.com/windows/downloads/ie/getitnow.mspx
	Mozilla Firefox 3.0:	http://www.mozilla.com/en-US/firefox/