Welcome to the State Water Resources Control Board Welcome to the California Environmental Protection Agency
Governor's Website Visit the Water Board Members Page
Agendas
My Water Quality
Performance Report
1516PERFORMANCE REPORT The Water Boards...

State Water Board Logo

The California Water Boards' Annual Performance Report - Fiscal Year  2015-16 

REGULATE: WASTE DISCHARGES TO LAND - WDR

GROUP: INDUSTRIAL WASTE WDR FACILITIES
MEASURE: NUMBER OF PERMITS ADOPTED OR RENEWED
NUMBER OF PERMITS PAST RENEWAL DATE AS OF END OF FISCAL YEAR 2015-16
MESSAGE:  

MEASUREMENTS  - Data Last Updated on: 

FusionCharts will load here

 

FusionCharts will load here

WHAT THE MEASURE IS SHOWING

WHY THIS MEASURE IS IMPORTANT

TECHNICAL CONSIDERATIONS

GLOSSARY

Industrial Sources
Facilities that treat and/or dispose of liquid or semisolid wastes from any servicing, producing, manufacturing or processing operations of whatever nature including mining, gravel washing, geothermal operations, air conditioning, ship building and repairing, oil production, storage and disposal operations, and water well pumping.

Waste Discharge Requirements Program
The Waste Discharge Requirements (WDR) Program regulates all point source discharges of waste to land that do not require full containment (which falls under the Land Discharge Program), or are not subject to the NPDES Program.

Review/Update Actions
The Waste Discharge Requirements WDRs are to be reviewed according to a schedule based upon their TTWQ Category as follows: TTWQ 1= Every 5 years, TTWQ 2= Every 10 years and TTWQ 3= Every 15 years. TTWQ 1 has the highest priority. There are three possible actions which may result from the WDR review/update process: rescission, continuance, or revision. A revision requires the issuance of a new WDR with a new adoption date. No formal Regional Board action is required to continue WDRs without change. A memorandum signed by the Regional Board Executive Officer (EO), documenting that the review concluded that the existing WDR is appropriate and that no changes are necessary at this time, is placed in the WDR file.



( Page last updated:  6/27/16 )

 
 

.