Welcome to the State Water Resources Control Board Welcome to the California Environmental Protection Agency
Governor's Website Visit the Water Board Members Page
My Water Quality
Performance Report
UST Program - LG 113

UST Program - LG 113

Issue Date: April 19, 2001
Revision Date: May 8, 2012


FE Petro, Inc.

STP-MLD-HC and STP-MLD-HCD Pipeline Leak Detectors
(for Rigid, Flexible, or Hybrid Combination of Rigid and Flexible Pipelines)


Certification Leak rate of 3.0 gph with PD = 100% and PFA = 0%.
Leak Threshold 2.0 gph. 
A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold.
Applicability Gasoline, diesel, aviation fuel for STP-MLD-HC.
Diesel, kerosene for STP-MLD-HCD.
Other liquids may be tested after consultation with the manufacturer.
Specification System tests pressurized rigid, flexible, and combination of rigid and flexible pipelines.
Tests are conducted at operating pressure.
Pipeline Capacity Maximum of 396.6 gallons for rigid pipelines.
Maximum of 95.5 gallons for flexible pipelines.
Maximum combined capacity is 492.1 gallons, not to exceed the above individual capacity limitations for rigid or flexible pipelines.
Waiting Time None between delivery and testing. 
None between dispensing and testing.
Test Period Response time is less than 30 seconds.
System Features Permanent installation on pipeline. 
Automatic testing of pipeline. 
Preset threshold. Single test to determine if pipeline is leaking. 
Restricted flow to dispenser if leak is declared.
Calibration Equipment must be checked annually for capability of detecting a line leak of 3.0 gph and, if necessary, calibrated in accordance with manufacturer's instructions.
Comments STP-MLD-HC test conducted using gasoline in 200 feet of 3.25 inch fiberglass pipe.STP-MLD-HCD test conducted using diesel in 200 feet of 3.25 inch fiberglass pipe.


Franklin Fueling Systems Evaluator: Ken Wilcox Associates
3760 Marsh Road Tel: (816) 443-2494
Madison, WI 53718 Dates of Evaluation: 11/07/00 & 05/19/06
Tel: (800) 225-9787  
Email: info@franklinfueling.com  
URL: www.franklinfueling.com  

 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.
For full details, please refer to our expanded "DISCLAIMER" page.