Welcome to the State Water Resources Control Board Welcome to the California Environmental Protection Agency
Governor's Website Visit the Water Board Members Page
Agendas
My Water Quality
Performance Report
UST Program - LG 113

UST Programs - LG 113

Issue Date: November 22, 1995
Revision Date: April 27, 2005

Purpora Engineering, Inc. (originally listed as Heath Consultants, Inc.)

Petro Tite II

VOLUMETRIC TANK TIGHTNESS TEST METHOD (OVERFILL)

Certification Leak rate of 0.1 gph with PD = 99% and PFA = 1%.
Leak Threshold 0.05 gph. 
A tank system should not be declared tight if the test result indicates a loss or gain that equals or exceeds this threshold.
Applicability Gasoline, diesel, aviation fuel, fuel oil #4.
Tank Capacity Maximum of 15,000 gallons. 
Tank must be minimum 100% full. 
An automatic product leveler must be used to maintain a constant product level during test.
Waiting Time None between delivery and testing. 
There must be no dispensing or delivery during waiting time.
Test Period Minimum of 2 hours. 
Test data are acquired and recorded manually. 
Leak rate calculated based on cumulative volume change during low level test (generally based on 1 hour average volume change). 
Product must be mixed continuously throughout test period. 
There must be no dispensing or delivery during test.
Temperature Average for product is determined by a single DTS-2000 digital sensor.
Groundwater Depth to groundwater in tank excavation backfill must be determined. 
If groundwater is above bottom of tank, product level must be adjusted to provide a minimum net pressure of 4 psi at bottom of tank during test.
Calibration Sensor calibration must be checked at each use and, if necessary, calibrated in accordance with manufacturer's instructions. 
The DTS-2000 digital sensor must be recertified a minimum of once every 3 years.
Comments Not evaluated using manifolded tank systems.

 

Purpora Engineering LLC

Evaluator:  Ken Wilcox Associates

P.O. Box 170591

Tel:  (816) 443-2494

Milwaukee, WI 53207

Date of Evaluation:  11/01/90

Tel: (800) 352-2011

 

E-mail: sap@purporaengineering.com  
URL: www.purporaengineering.com  
 

 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.
For full details, please refer to our expanded "DISCLAIMER" page.

 
 

.