Welcome to the State Water Resources Control Board Welcome to the California Environmental Protection Agency
Governor's Website Visit the Water Board Members Page
My Water Quality
Performance Report
UST Program - LG 113

UST Programs - LG 113

Issue Date: February 6, 2006
Revision Date: September 20, 2011  


Red Jacket FX1V, FX2V in Big Flow or Packer Manifold
(for Rigid and Flexible Pipelines)


Certification Leak rate of 3.0 gph with PD = 100% and PFA = 0%..
Leak Threshold 1.5 gph at 10 psi. A pipeline system should not be declared tight if the test result indicates a loss that equals or exceeds this threshold.
Applicability Gasoline, ethanol blends up through E100.
Specification System tests pressurized pipelines. Tests are conducted at 8-12 psi.
Pipeline Capacity Maximum of 416.7 gallons for rigid pipelines.
Maximum of 95.4 gallons for flexible pipelines.
Waiting Time None between delivery and testing.
None between dispensing and testing.
Stabilization time up to 45 minutes may be required after dispensing when temperature extremes are present.
Test Period Response time is less than 5 minutes.
System Features Permanent installation on pipeline.
Automatic testing of pipeline.
Preset threshold.
Total vertical rise of pipeline must not exceed 11 feet above leak detector.
Single test to determine if pipeline is leaking.
Restricted flow to dispenser if leak is declared.
Calibration Equipment must be checked annually for capability of detecting a line leak of 3.0 gph and, if necessary, calibrated in accordance with manufacturer's instructions.



Evaluator:  Ken Wilcox Associates

125 Powder Forest Dr.

Tel:  (816) 443-2494

Simsbury, CT 06070-2003

Dates of Evaluation:  03/14/94, 03/22/94, 06/01/94, 11/21/05, 03/24/11(letter)

Tel: (860) 651-2700  
E-mail: info@veeder.com  

URL: www.veeder.com


 | Home | Vendors: A - F | Vendors: G - M | Vendors: N - S | Vendors: T - Z | Method Index |

Appearance on this list is not to be construed as an endorsement by any regulatory agency nor is it any guarantee of the performance of the method or equipment.
Equipment should be installed and operated in accordance with all applicable laws and regulations.
For full details, please refer to our expanded "DISCLAIMER" page.